Problem
Cleaning Method
Comments
Standard cleaning
Soap and water
Sponge, rinse with clean water
and wipe dry
Fingerprints
Soap and warm water or
stainless steel cleaner
(18990097063)
Rinse with clean water
and wipe dry
Oil/grease marks, other stains
and light discolouration
Pro-Railing Enviro-Shield
(189900902)
Follow instructions
on the box
Heavy discolouration
Stainless cleaning gel
(18990094023)
Rinse well with clean water then use
Pro-Railing Enviro-Shield
(189900902)
Scratches on satin finish
(Mirror finish will need
repolishing properly)
Slight scratches
Use fine polishing cloth
(189901101)
coated with stainless steel cleaner
(18990097063)
Deeper scratches
Use coarse cloth
(189901102)
first then fine cloth with cleaner
(as above)
Do not use steel based
cleaning products (wire wool)
as this will embed in the surface
and will cause further surface
damage and discolouration
Paint/Graffiti
Use a generic paint stripper
dependant on type of paint
Use soft bristle brush and treat
afterwards with Pro-Railing
Enviro-Shield
(189900902)
Stainless Steel
Cleaner (400ml)
Degreases & cleans surfaces
ready for gluing
After Care Tea Staining
3-Part Cleaner Kit
Keeps stainless handrail and
fittings in top condition long after
installation
Stainless Cleaning Gel
Pickling gel helps remove rust, dirt
and grime from stainless steel
Polishing Cloths
For removal of light scratches on
stainless tube and fittings
Code
Description
18990097063
Stainless Steel
Cleaner
Code
Description
189900902
3 Part
Cleaner Kit
Code
Description
18990094023
Stainless
Cleaning Gel
Code
Description
189901101
Fine (Grey)
189901102
Medium (Red)
The following items should be considered and are available as part of the Pro-Glass range:
Latex Gloves
Size 8
Protective Sleeve
For Wrist
14”
Clear Protective
Spectacles
Double Head Suction Cup
2 x 120mm diameter rubber
suction cups. Max. lift: 70kg
The PGK10 glove from Marigold
is based around a 10 gauge 100%
Kevlar liner with a natural rubber
latex crinkle coating that provides
good grip in wet or dry conditions,
abrasion and tear resistant. The
thumb is fully coated to protect the
most vulnerable part of the hand.
Granite 5 Solo, seamless knitted
high cut resistant Tensilite Sleeves
with thumb slot. Suitable for use
in the glazing and steel industries.
The unique yarn provides level 5
cut reistance. The yarn is made
with a soft finish to provide
exceptional comfort to the wearer.
One piece clear polycarbonate
lens with anti-mist treatment.
Lightweight black nylon frame with
built-in brow guard. Built-in side
protection with integral nose bridge
and adjustable temple length.
Low energy impact protection with
400nm UV protection. Hang cord
attachment points. Class 1.
For use in hand lift applications
only. Multiple vacuums used on
a single load can only improve
handling. If using more than one
vacuum tool the ratio of maximum
lift capacity does not increase. To
lift heavier weights a larger vacuum
must be used. All are fitted with
a rubber suction which will not
damage contact surface during the
lifting action.
Code
185900101
Code
185900102
Code
185900103
Code
185900104
56
CLEANING METHODS
